Description
The MERCUSYS MS106LP is an unmanaged Fast Ethernet PoE+ switch designed for surveillance, small offices, retail environments, and other applications where compatible devices need both network connectivity and electrical power through a single Ethernet cable.
It features six 10/100 Mbps RJ45 ports. Ports 1–4 support PoE+, while ports 5–6 operate as non-PoE uplink/data ports. MERCUSYS specifically describes the two uplink ports as suitable for connecting an internet router and an NVR when Isolation Mode is enabled.
Four PoE+ Ports
Ports 1–4 support IEEE 802.3af/at compliant Powered Devices and can transmit both network data and electrical power over one Ethernet cable.
Suitable devices include:
- IP Cameras
- Wireless Access Points
- IP Phones
- Other IEEE 802.3af/at Powered Devices
Each port can supply up to 30 W, while the combined PoE budget for all four ports is 40 W.
40 W Total PoE Budget
The MS106LP provides a shared 40 W PoE power budget across ports 1–4.
This makes it suitable for several low- to medium-power PoE devices without requiring a separate electrical adapter beside every camera or access point.
Two Uplink Ports
Ports 5 and 6 provide data connectivity without PoE output.
They can typically be used for:
- Router / Internet Gateway
- Network Video Recorder — NVR
- PC
- Additional Network Equipment
MERCUSYS specifically highlights the two uplinks when Isolation Mode is enabled: one can connect to the internet/router and the other to an NVR.
Extend Mode up to 250 Meters
Enable Extend Mode to increase PoE data and power transmission distance to up to 250 meters on ports 1–4.
This is useful for cameras positioned far from the switch in shops, warehouses, parking areas, offices, and similar surveillance installations.
When Extend Mode is enabled, the affected ports operate at 10 Mbps. Actual distance depends on cable quality and the connected PoE device.
Isolation Mode
When Isolation Mode is enabled, ports 1–4 cannot communicate directly with one another and instead communicate through the uplink ports.
This can improve traffic separation, reduce the effect of broadcast storms, and provide a more controlled network layout for surveillance devices.
Priority Ports 1–2
Ports 1 and 2 have higher traffic priority when network congestion occurs.
MERCUSYS recommends these ports for important network devices such as cameras or access points where video or voice traffic should receive priority.
PoE Auto Recovery
The MS106LP can continuously monitor connected PoE-powered devices.
If a powered device becomes unresponsive, PoE Auto Recovery can automatically reboot it by cycling PoE power, reducing the need for manual intervention.
Durable Metal Housing
The switch features a durable metal casing designed for efficient heat dissipation, stable operation, and long service life.
Its fanless architecture also provides silent operation, while wall-mounting support gives users additional installation flexibility.
Key Features
- 6-Port Fast Ethernet PoE+ Switch
- 6 × 10/100 Mbps RJ45 Ports
- 4 × 10/100 Mbps PoE+ Ports
- 2 × 10/100 Mbps Uplink / Non-PoE Ports
- IEEE 802.3af / 802.3at Compatible
- Up to 30 W per PoE Port
- 40 W Total PoE Budget
- Extend Mode up to 250 m
- Priority Ports 1–2
- Isolation Mode
- PoE Auto Recovery
- Auto-Negotiation
- Auto-MDI/MDIX
- IEEE 802.3x Flow Control
- Store-and-Forward Switching
- 1.2 Gbps Switching Capacity
- 2K MAC Address Table
- Automatic MAC Learning
- Automatic MAC Aging
- 2 KB Jumbo Frame
- Plug & Play
- No Configuration Required
- Durable Metal Housing
- Fanless Silent Operation
- Desktop Installation
- Wall Mounting
- Power / Link-Act / PoE Status LEDs
Technical Specifications
| Brand | MERCUSYS |
|---|---|
| Model | MS106LP |
| Hardware Version | V1 |
| Product Type | Unmanaged Fast Ethernet PoE+ Switch |
| Total Ethernet Ports | 6 |
| Port Speed | 10/100 Mbps |
| PoE+ Ports | Ports 1–4 |
| Non-PoE / Uplink Ports | Ports 5–6 |
| PoE Standard | IEEE 802.3af / IEEE 802.3at |
| Maximum PoE Power per Port | Up to 30 W |
| Total PoE Power Budget | 40 W |
| Auto-Negotiation | Supported |
| Auto-MDI/MDIX | Supported |
| PoE Power Pins | Power+: Pins 3 & 6 / Power−: Pins 1 & 2 |
| Extend Mode | Up to 250 m |
| Extend Mode Port Speed | 10 Mbps |
| Priority Ports | Ports 1–2 |
| Isolation Mode | Supported |
| PoE Auto Recovery | Supported |
| Switching Capacity | 1.2 Gbps |
| MAC Address Table | 2K |
| MAC Learning | Automatic |
| MAC Aging | Automatic |
| Jumbo Frame | 2 KB |
| Forwarding Method | Store-and-Forward |
| Flow Control | IEEE 802.3x |
| Cooling | Fanless |
| Enclosure | Metal |
| Installation | Desktop / Wall Mount |
| LED Indicators | Power / Link-Act / PoE Status |
| Power Adapter Output | 53.5V / 0.81A |
| Dimensions | 99.8 × 98 × 25 mm |
| Max Power Consumption – No PD | 1.87 W |
| Max Power Consumption – 40W PD Load | 44.8 W |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10%–90% RH, Non-Condensing |
| Storage Humidity | 5%–95% RH, Non-Condensing |
Main Benefits
Power and Data Through One Cable
PoE+ allows compatible cameras, access points, and IP phones to receive both network data and electrical power using a single Ethernet cable, simplifying installations.
Four PoE+ Ports
Ports 1–4 can power IEEE 802.3af/at compliant devices, with up to 30 W available from an individual port subject to the total power budget.
40 W Shared Power Budget
The total available PoE budget is 40 W, making the model particularly suited to small surveillance and low-to-medium-power PoE installations.
Two Dedicated Uplink Ports
Two non-PoE data ports provide convenient connections for a router and NVR without consuming the four powered-device ports.
Long-Range PoE Transmission
Extend Mode allows supported PoE connections to reach up to 250 meters, making remote camera placement significantly easier.
Automatic PoE Device Recovery
PoE Auto Recovery can automatically reboot certain unresponsive connected devices, helping improve surveillance-system uptime.
Improved Surveillance Isolation
Isolation Mode prevents ports 1–4 from communicating directly with one another while maintaining uplink connectivity.
Priority for Important Devices
Ports 1 and 2 receive traffic priority during congestion, which can help protect video and voice applications from competing traffic.
Silent and Durable
The metal, fanless design provides passive cooling without fan noise, making the switch suitable for offices, homes, stores, and surveillance installations.
Recommended Uses
- CCTV Surveillance Systems
- IP Camera Networks
- Network Video Recorders — NVR
- Wireless Access Points
- IP Phones
- Retail Stores
- Small Offices
- Restaurants and Cafés
- Small Businesses
- Warehouses
- Dormitories
- Home Surveillance
- Long-Distance Camera Installations
- Wall-Mounted Network Installations
Package Contents
- 1 × MERCUSYS MS106LP 6-Port 10/100 Mbps PoE+ Switch
- 1 × Power Adapter
- Rubber Feet
- 1 × Quick Installation Guide




Reviews
There are no reviews yet.