Description
The MERCUSYS MS128GP is an unmanaged, rackmount Gigabit PoE+ switch built for larger wired networks where a high number of powered devices must be connected through one central switch.
It provides 28 Gigabit interfaces in total:
- 24 × 10/100/1000 Mbps PoE+ RJ45 ports
- 2 × 10/100/1000 Mbps Gigabit RJ45 uplink ports
- 2 × Gigabit SFP slots
Unlike models that use shared RJ45/SFP combo interfaces, the MS128GP's two SFP slots are additional interfaces; MERCUSYS only describes combo behavior for other models such as MS118CP and MS126CP.
24 Gigabit PoE+ Ports
Ports 1–24 support IEEE 802.3af/at compliant Powered Devices, allowing compatible equipment to receive both network data and electrical power through a single Ethernet cable.
Typical devices include:
- IP Cameras
- Wireless Access Points
- IP Phones
- Network Video Equipment
- Other IEEE 802.3af/at Powered Devices
Each PoE+ port supports up to 30 W, while the total PoE power budget is 295 W.
Massive 295 W PoE Budget
The 295 W total PoE budget gives the MS128GP enough capacity for considerably larger deployments than compact desktop PoE switches.
MERCUSYS positions it for environments such as surveillance systems, offices, and small-to-medium business networks where many PoE devices may operate simultaneously.
Full Gigabit Connectivity
All 26 RJ45 interfaces support Gigabit Ethernet, while the two SFP slots support Gigabit SFP connectivity.
The official specification supports:
- 10BASE-T
- 100BASE-TX
- 1000BASE-T
- 1000BASE-X via SFP
The SFP ports support 1000 Mbps SFP modules and optical connections using compatible multimode or single-mode fiber.
56 Gbps Switching Capacity
The MS128GP provides a 56 Gbps switching capacity, allowing it to handle simultaneous traffic across its high number of Gigabit interfaces.
Extend Mode up to 250 Meters
The switch includes Extend Mode for long-range PoE deployments.
For the corresponding long-range ports, enabling Extend Mode increases supported PoE data and power transmission distance from the standard 100 m to up to 250 m.
When Extend Mode is enabled, affected ports operate at 10 Mbps. Actual achievable distance can vary according to Ethernet cable quality, cable type, and connected-device power requirements.
Priority Ports 1–4
MERCUSYS specifies ports 1–4 as higher-priority ports when network congestion occurs.
Connecting critical devices such as important IP cameras or wireless access points to these ports can help protect sensitive video or voice traffic.
Isolation Mode
Isolation Mode separates downlink traffic to improve stability and security.
For MS128GP, the official specification divides the PoE interfaces into isolation groups covering ports 1–12 and ports 13–24, reducing direct communication between isolated devices while maintaining uplink access.
PoE Auto Recovery
The MS128GP continuously monitors compatible powered devices.
If a PoE-powered device becomes unresponsive, PoE Auto Recovery can automatically reboot it, reducing the need for manual power cycling and helping improve system uptime.
Two Gigabit RJ45 Uplinks
The two additional Gigabit RJ45 ports are suitable for connections to:
- Router / Internet Gateway
- NVR
- Server
- Core Switch
- Additional Network Infrastructure
These ports do not consume the 24 PoE device interfaces.
Two Gigabit SFP Slots
Two dedicated SFP slots allow fiber uplinks where longer distance or electrical isolation is required.
MERCUSYS specifies support for 1000BASE-X over compatible MMF or SMF modules.
Durable Rackmount Metal Chassis
The MS128GP uses a durable metal enclosure designed for professional rack installations.
The chassis measures 440 × 180 × 44 mm, corresponding to a standard 1U-class rack height, and mounting brackets and fittings are included.
Active Cooling with Two Fans
Unlike many smaller MERCUSYS desktop switches, the MS128GP is not fanless.
The official specification lists 2 cooling fans, which support thermal management under heavy PoE loads.
Key Features
- 28-Port Gigabit Rackmount PoE+ Switch
- 24 × 10/100/1000 Mbps Gigabit PoE+ RJ45 Ports
- 2 × Gigabit RJ45 Uplink Ports
- 2 × Gigabit SFP Slots
- IEEE 802.3af / IEEE 802.3at Compatible
- Up to 30 W per PoE Port
- 295 W Total PoE Budget
- 56 Gbps Switching Capacity
- 8K MAC Address Table
- Extend Mode up to 250 m
- Priority Ports 1–4
- Isolation Mode
- PoE Auto Recovery
- Auto-Negotiation
- Auto-MDI/MDIX
- IEEE 802.3x Flow Control
- Store-and-Forward Switching
- Automatic MAC Learning
- Automatic MAC Aging
- 2 Cooling Fans
- Durable Metal Housing
- Rackmount Installation
- Physical Security Lock
- Plug & Play
- Power / Link-Act / PoE Status / PoE Max LEDs
Technical Specifications
| Brand | MERCUSYS |
|---|---|
| Model | MS128GP |
| Hardware Version | V1 |
| Product Type | Unmanaged Gigabit Rackmount PoE+ Switch |
| Total Network Interfaces | 28 |
| PoE+ RJ45 Ports | 24 × 10/100/1000 Mbps |
| PoE Port Numbers | Ports 1–24 |
| Gigabit RJ45 Uplink Ports | 2 × 10/100/1000 Mbps |
| SFP Slots | 2 × Gigabit SFP |
| SFP Speed | 1000 Mbps |
| PoE Standards | IEEE 802.3af / IEEE 802.3at |
| Maximum PoE per Port | Up to 30 W |
| Total PoE Budget | 295 W |
| Switching Capacity | 56 Gbps |
| MAC Address Table | 8K |
| Forwarding Method | Store-and-Forward |
| Auto-Negotiation | Supported |
| Auto-MDI/MDIX | Supported |
| Flow Control | IEEE 802.3x |
| Extend Mode | Up to 250 m |
| Extend Mode Speed | 10 Mbps |
| Priority Ports | Ports 1–4 |
| Isolation Mode | Ports 1–12 / 13–24 |
| PoE Auto Recovery | Ports 1–24 |
| Copper Cable – 10BASE-T | Cat3 or Above, ≤100 m |
| Copper Cable – 100BASE-TX | Cat5 or Above, ≤100 m |
| Copper Cable – 1000BASE-T | Cat5e or Above, ≤100 m |
| Fiber Support | 1000BASE-X, MMF / SMF |
| Cooling | 2 Fans |
| Enclosure | Steel / Metal |
| Installation | Rackmount / Desktop |
| Rack Height | Approx. 1U |
| Dimensions | 440 × 180 × 44 mm |
| Physical Security Lock | Yes |
| AC Power Input | 100–240 VAC, 50/60 Hz |
| Max Power Consumption at 220V | 336.58 W with 295 W PD load |
| Certifications | CE / RoHS |
| Operating Temperature | -10°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10%–90% RH, Non-Condensing |
| Storage Humidity | 5%–90% RH, Non-Condensing |
Main Benefits
High-Density PoE Deployment
With 24 Gigabit PoE+ ports, the MS128GP can centralize a large number of compatible cameras, access points, and IP phones into one rack-mounted switch.
295 W Power Capacity
Its large PoE budget makes it significantly more suitable for multi-device installations than entry-level 40 W, 65 W, or 110 W PoE switches.
Full Gigabit PoE Performance
Every PoE port supports Gigabit Ethernet rather than being limited to 100 Mbps, helping support high-resolution surveillance, modern access points, and other bandwidth-intensive devices.
Copper and Fiber Uplink Flexibility
Two Gigabit RJ45 uplinks plus two independent Gigabit SFP interfaces provide flexible copper and fiber connectivity options.
Long-Range Camera Installations
Extend Mode supports PoE transmission up to 250 meters on the designated ports, useful for cameras installed far from the central rack.
Automatic Recovery
PoE Auto Recovery can restart unresponsive powered devices automatically, helping reduce maintenance requirements.
Better Traffic Separation
Isolation Mode separates large groups of PoE devices to help improve security and reduce unwanted traffic between endpoints.
Priority for Critical Devices
Ports 1–4 receive higher transmission priority during congestion, making them suitable for critical cameras and access points.
Recommended Uses
- Large CCTV Surveillance Systems
- High-Resolution IP Camera Networks
- Office Buildings
- Warehouses
- Hotels
- Schools
- Retail Chains
- Restaurants and Hospitality
- Wireless Access Point Deployments
- IP Phone Networks
- Network Video Recorders
- Fiber Uplink Networks
- Small and Medium Businesses
- Multi-Floor Network Installations
- Professional Rack Cabinets
Package Contents
- 1 × MERCUSYS MS128GP
- 1 × Power Cord
- 1 × Installation Guide
- Mounting Brackets and Fittings




Reviews
There are no reviews yet.