Description
The MERCUSYS MS118CP is an unmanaged rackmount PoE+ switch designed for surveillance and business networks requiring a larger number of powered Ethernet connections.
It provides 16 × 10/100 Mbps PoE+ RJ45 ports for powered devices, plus 2 × Gigabit RJ45 interfaces and 2 × Combo Gigabit SFP slots for high-speed copper or fiber uplink connectivity.
Sixteen PoE+ Ports
Ports 1–16 support IEEE 802.3af/at compliant Powered Devices and can transmit both data and electrical power through a single Ethernet cable.
Typical compatible devices include:
- IP Cameras
- Wireless Access Points
- IP Phones
- Other IEEE 802.3af/at Powered Devices
Each PoE+ port supports up to 30 W, while the total available PoE budget across the switch is 190 W.
Powerful 190 W PoE Budget
With a total 190 W PoE power budget, the MS118CP is suitable for larger surveillance systems with multiple PoE cameras or other powered network devices.
MERCUSYS notes that the PoE budget is based on laboratory testing and actual available power can vary according to connected-device limitations and environmental conditions.
Dual Gigabit RJ45 Uplinks
The two Gigabit RJ45 ports provide high-speed upstream connectivity for devices such as:
- Network Video Recorders — NVR
- Routers
- Servers
- Upstream Network Switches
This avoids limiting the main network uplink to the 100 Mbps speed of the sixteen PoE access ports.
Combo Gigabit SFP Connectivity
The MS118CP also provides 2 × Combo Gigabit SFP slots, supporting fiber network connectivity using compatible Gigabit SFP transceivers.
The official specification supports 1000BASE-SX, LX10, and BX10 over suitable multimode or single-mode fiber.
Extend Mode up to 250 Meters
Enable Extend Mode to increase supported PoE data and power transmission distance to as much as 250 meters, making the switch useful for cameras installed far from the network cabinet.
When Extend Mode is active, the applicable port speed is reduced to 10 Mbps. Actual transmission distance depends on cable quality and installation conditions.
Priority Mode — Ports 1–8
Ports 1–8 can receive higher traffic priority to help maintain performance for sensitive applications such as video surveillance during periods of network congestion.
Isolation Mode
Isolation Mode separates client traffic on ports 1–16, helping improve network security and reduce unwanted communication or broadcast interference between surveillance devices.
PoE Auto Recovery
The MS118CP includes PoE Auto Recovery, allowing the switch to automatically reboot certain dropped or unresponsive PoE-powered devices without requiring manual power cycling.
Plug & Play
The switch supports Auto-Negotiation and Auto-MDI/MDIX and operates as an unmanaged switch, so normal network deployment requires no management software or configuration.
Rackmount Metal Design
The MS118CP measures approximately 440 × 180 × 44 mm, corresponding to a 1U 19-inch rackmount installation when used with the supplied rack brackets.
Its metal chassis is designed for fixed professional installations such as network cabinets and surveillance racks.
Key Features
- 16-Port PoE+ Rackmount Switch
- 16 × 10/100 Mbps PoE+ RJ45 Ports
- 2 × 10/100/1000 Mbps Gigabit RJ45 Ports
- 2 × Combo Gigabit SFP Slots
- IEEE 802.3af / IEEE 802.3at Compatible
- Up to 30 W per PoE Port
- 190 W Total PoE Budget
- Extend Mode up to 250 m
- Priority Mode — Ports 1–8
- Isolation Mode — Ports 1–16
- PoE Auto Recovery — Ports 1–16
- Auto-Negotiation
- Auto-MDI/MDIX
- Store-and-Forward Switching
- 7.2 Gbps Switching Capacity
- 5.36 Mpps Packet Forwarding Rate
- 8K MAC Address Table
- 10 KB Jumbo Frame
- IEEE 802.3x Flow Control
- Plug & Play
- Metal Rackmount Chassis
- Physical Security Lock
- 1U 19-Inch Rack Installation
Technical Specifications
| Brand | MERCUSYS |
|---|---|
| Model | MS118CP |
| Reference Hardware Version | V1 |
| Product Type | Unmanaged Rackmount PoE+ Switch |
| PoE+ Ports | 16 × 10/100 Mbps RJ45 |
| PoE Port Numbers | Ports 1–16 |
| Gigabit RJ45 Ports | 2 × 10/100/1000 Mbps |
| SFP Slots | 2 × Combo Gigabit SFP |
| PoE Standard | IEEE 802.3af / IEEE 802.3at |
| Maximum PoE Power per Port | Up to 30 W |
| Total PoE Budget | 190 W |
| Auto-Negotiation | Supported |
| Auto-MDI/MDIX | Supported |
| Switching Capacity | 7.2 Gbps |
| Packet Forwarding Rate | 5.36 Mpps |
| MAC Address Table | 8K |
| Jumbo Frame | 10 KB |
| Forwarding Method | Store-and-Forward |
| Flow Control | IEEE 802.3x |
| Extend Mode | Up to 250 m |
| Extend Mode Speed | 10 Mbps |
| Priority Mode | Ports 1–8 |
| Isolation Mode | Ports 1–16 |
| PoE Auto Recovery | Ports 1–16 |
| SFP Fiber Standards | 1000BASE-SX / LX10 / BX10 |
| Power Supply | 100–240V AC, 50/60 Hz |
| Chassis | Steel / Metal |
| Rack Size | 1U, 19-inch Rackmount |
| Physical Security Lock | Yes |
| Dimensions | 440 × 180 × 44 mm |
| Maximum Power Consumption | 218.91 W with 190 W PD load |
| Certifications | CE / RoHS |
| Operating Temperature | -5°C to 50°C in current datasheet |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10%–90% RH, Non-Condensing |
| Storage Humidity | 5%–95% RH, Non-Condensing |
Main Benefits
Sixteen PoE+ Connections
The MS118CP can directly power as many as 16 compatible PoE devices, making it much more suitable for larger surveillance installations than compact four- or eight-port PoE switches.
High 190 W PoE Capacity
A 190 W shared power budget gives the switch significantly more capacity for multiple cameras, access points, or IP phones.
Copper and Fiber Uplink Flexibility
The combination of Gigabit RJ45 and Combo SFP connectivity provides flexible integration with local copper networks or longer-distance fiber infrastructure.
Long-Range Surveillance Deployment
Extend Mode allows supported camera connections to reach up to 250 meters, useful in warehouses, factories, compounds, parking areas, and large retail sites.
Automatic PoE Device Recovery
PoE Auto Recovery can restart certain unresponsive powered devices automatically, reducing the need for on-site manual intervention.
Priority for Critical Cameras
Priority Mode on ports 1–8 can help preserve traffic quality for more important cameras or other sensitive network devices.
Network Isolation
Isolation Mode separates client traffic across ports 1–16, useful for improving traffic control and security in surveillance environments.
Recommended Uses
- Medium and Large CCTV Systems
- IP Camera Networks
- Network Video Recorders — NVR
- Retail Stores and Shopping Areas
- Warehouses
- Offices
- Schools and Training Centers
- Hotels
- Parking Areas
- Factories
- Compounds
- Wireless Access Points
- IP Phones
- Rack-Mounted Surveillance Systems
- Fiber-Uplink Network Installations
Package Contents
- 1 × MERCUSYS MS118CP Rackmount PoE+ Switch
- 1 × Power Cable
- 1 × Installation Guide
- 2 × Mounting Brackets
- Mounting Fittings




Reviews
There are no reviews yet.