Description
The MERCUSYS MS110P is an unmanaged Fast Ethernet PoE+ switch designed to simplify network deployment by delivering both network data and electrical power over standard Ethernet cabling.
It provides 10 × 10/100 Mbps RJ45 ports in total. Ports 1–8 support PoE+, while the remaining two ports serve as non-PoE uplink connections, allowing users to connect multiple PoE devices while maintaining dedicated links to equipment such as an internet router and NVR.
Eight PoE+ Ports
Ports 1–8 are compatible with IEEE 802.3af/at Powered Devices and can carry both Ethernet data and electrical power through a single network cable.
Typical compatible devices include:
- IP Cameras
- Wireless Access Points
- IP Phones
- Other IEEE 802.3af/at Powered Devices
Each PoE+ port supports up to 30 W, subject to the total 65 W PoE power budget.
65 W Total PoE Budget
The MS110P provides a total 65 W shared PoE budget across ports 1–8.
This allows several compatible PoE devices to operate without requiring separate power adapters near each camera, access point, or IP phone.
Two Uplink Ports
The two non-PoE Ethernet ports can be used for devices such as:
- Internet Router / Gateway
- NVR
- PC
- Additional Network Equipment
MERCUSYS specifically describes them as two uplink ports when Isolation Mode is active, with one typically connecting to the internet/router and the other to an NVR.
Extend Mode up to 250 Meters
Activate Extend Mode to increase PoE transmission distance to up to 250 meters.
This makes the MS110P useful for surveillance cameras installed far from the central network cabinet in warehouses, parking areas, offices, shops, and other large locations. MERCUSYS notes that ports operating in Extend Mode are reduced to 10 Mbps.
Isolation Mode
Isolation Mode separates traffic across ports 1–8, helping reduce direct communication between connected devices and isolating broadcast traffic.
This is particularly useful in IP surveillance environments where cameras should primarily communicate with an uplink or NVR.
Priority Ports 1–2
The physical front panel officially marks ports 1 and 2 as priority ports. Port prioritization helps protect sensitive applications such as voice and video when network traffic becomes congested.
PoE Auto Recovery
The MS110P includes PoE Auto Recovery.
The switch monitors connected PoE devices and can automatically reboot certain unresponsive powered devices by cycling their PoE power, reducing the need for manual intervention.
Plug & Play
The switch supports Auto-Negotiation and Auto-MDI/MDIX, so no software installation or management configuration is required for normal operation.
Durable Metal Housing
The MS110P uses a durable metal enclosure designed for effective heat dissipation and stable long-term operation.
Its fanless design provides silent operation, and it supports both desktop placement and wall mounting.
Key Features
- 10-Port Fast Ethernet Desktop PoE+ Switch
- 10 × 10/100 Mbps RJ45 Ports
- 8 × 10/100 Mbps PoE+ Ports
- 2 × 10/100 Mbps Non-PoE / Uplink Ports
- IEEE 802.3af / IEEE 802.3at Compatible
- Up to 30 W per PoE Port
- 65 W Total PoE Budget
- Extend Mode up to 250 m
- Priority Ports 1–2
- Isolation Mode
- PoE Auto Recovery
- Auto-Negotiation
- Auto-MDI/MDIX
- IEEE 802.3x Flow Control
- Store-and-Forward Switching
- 2 Gbps Switching Capacity
- 2K MAC Address Table
- Automatic MAC Learning
- Automatic MAC Aging
- Fanless Operation
- Plug & Play
- Durable Metal Housing
- Desktop Installation
- Wall Mounting
Technical Specifications
| Brand | MERCUSYS |
|---|---|
| Model | MS110P |
| Reference Hardware Version | V1 |
| Product Type | Unmanaged Fast Ethernet PoE+ Switch |
| Total Ethernet Ports | 10 |
| Port Speed | 10/100 Mbps |
| PoE+ Ports | Ports 1–8 |
| Non-PoE / Uplink Ports | 2 |
| PoE Standard | IEEE 802.3af / IEEE 802.3at |
| Maximum PoE Power per Port | Up to 30 W |
| Total PoE Budget | 65 W |
| Auto-Negotiation | Supported |
| Auto-MDI/MDIX | Supported |
| PoE Power Pins | Power+: Pins 3 & 6 / Power−: Pins 1 & 2 |
| Extend Mode | Up to 250 m |
| Extend Mode Speed | 10 Mbps |
| Priority Ports | Ports 1–2 |
| Isolation Mode | Supported |
| PoE Auto Recovery | Supported |
| Switching Capacity | 2 Gbps |
| MAC Address Table | 2K |
| MAC Learning | Automatic |
| MAC Aging | Automatic |
| Forwarding Method | Store-and-Forward |
| Flow Control | IEEE 802.3x |
| Cooling | Fanless |
| Enclosure | Metal / Steel |
| Installation | Desktop / Wall Mount |
| LED Indicators | Power / Link-Act / PoE Status |
| External Power Adapter | 53.5V / 1.31A |
| Dimensions | 171 × 98 × 27 mm |
| Max Power Consumption – No PD | 1.85 W |
| Max Power Consumption – 65W PD Load | 73.18 W |
| Certifications | CE / RoHS |
| Operating Temperature | -10°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10%–90% RH, Non-Condensing |
| Storage Humidity | 5%–95% RH, Non-Condensing |
Main Benefits
Eight PoE+ Device Connections
Eight powered ports allow a larger camera, access-point, or IP-phone deployment than typical four-port PoE switches.
65 W Shared PoE Capacity
The switch can provide up to 30 W on a single PoE+ port, while sharing a total 65 W budget across ports 1–8.
Two Dedicated Uplink Ports
The two additional data ports can be used for devices such as an internet router and NVR without consuming the eight PoE device ports.
Power and Data over One Cable
PoE+ allows compatible powered devices to receive network data and electrical power through a single Ethernet cable, reducing installation complexity.
Long-Range PoE Deployment
Extend Mode can increase supported PoE transmission distance to 250 meters, useful for cameras installed far from the switch.
Automatic Device Recovery
PoE Auto Recovery can restart certain unresponsive powered devices automatically, helping reduce maintenance and downtime.
Priority for Important Devices
Priority Ports 1–2 help give important voice or video traffic preference during network congestion.
Silent and Durable Operation
The fanless metal enclosure provides passive cooling without cooling-fan noise.
Recommended Uses
- CCTV Surveillance Systems
- IP Camera Networks
- Network Video Recorders — NVR
- Wireless Access Points
- IP Phones
- Small Offices
- Retail Stores
- Restaurants and Cafés
- Dormitories
- Small Businesses
- Warehouses
- Parking Areas
- Home Surveillance
- Long-Distance PoE Installations
Package Contents
- 1 × MERCUSYS MS110P 10-Port PoE+ Switch
- 1 × Power Adapter
- Rubber Feet
- 1 × Quick Installation Guide




Reviews
There are no reviews yet.